Choose the Right System

Engineered as a machine tool accessory for Vertical and Horizontal Milling Centers, Turning Centers and Swiss Screw Machines. High pressure coolant is the newest and most effective technology in today’s sophisticated CNC world. PowerPump is an effective way to supercharge your CNC machines. Benefits of high pressure coolant include improved tool life, faster cycle times, tighter tolerances and superior surface finishes.

Model-10000-Series-HMI

10000 / 11000 Series

Designed for use on swiss screw, turning and milling centers where sufficient coolant is available in the machine sump. Part cycle times are relatively short.

  • Coolant oil and water
  • Output Ports 1 to 8
  • Filter (1)
  • No reservoir

Model-20000-Series-HMI

20000 / 21000 Series

Designed for use on swiss screw, turning and milling centers where sufficient coolant is available in the machine sump. Part cycle times are long.

  • Coolant oil and water
  • Output Ports 1 to 8
  • Filter (2)
  • No reservoir

Model-30000-Series-IL

30000 / 31000 Series

Designed for use on turning and milling centers where insufficient coolant is available in the machine sump.

  • Coolant oil and water
  • Output Ports 1 to 8
  • Filter (2)
  • Reservoir 50 Gallon

Dual filters come with manually readable gauges and an electronic warning indicator that tell when the filter bag should be changed. This option eliminates down time associated with changing filters because the machine can stay running while the filter bag is changed. The filters are also connected electronically with an alarm circuit to notify the operator when the filter is full.

All the series systems alert the operator when the filter bag is approximately 75% full so the filter bag change can be scheduled at an opportune time.

All the series systems are designed with features to allow the filter bag to be changed in 5 minutes or less.